jet-Z CQB & CQBS

SPECIFICATIONS

Calibres Info compatibility chart
All .22 centrefire cartridges
Weight
(Depending on thread type)


jet-Z CQB 490-510 g UPDATED!
jet-Z CQBS 410-430 g UPDATED!
Diameter
40 mm
Overall length of suppressor

 
jet-Z CQB 147-156 mm
jet-Z CQBS 120-128 mm
Added length to weapon
jet-Z CQB 125 mm
jet-Z CQBS 96 mm
Net sound suppression
(1 m left of the muzzle, .222 Rem)
(shooters ear, .222 Rem)

28-32 dB (A)
27-30 dB (A) 
Warranty
2 years

DESCRIPTION

The Ase Utra jet-Z™ CQB and CQBS suppressors are lightweight,ultra-compact rifle suppressors.

Manufactured in Finland by Ase Utra OY, the jet-Z™CQB and CQBS suppressors incorporates Ase Utra's patented jet-Z™baffle system.

The jet-Z™ CQB and CQBS are all-steel, all-welded units.

The jet-Z™ CQB adds only 484 to 505 grams net weight and 125 mm added length to a typical rifle and the CQBS is even smaller and lighter at 411-432grams and an added length of 96 mm.

With a diameter of just 40 mm, the suppressors are slim enough to be used with low-mounted telescopic or iron sights.

The jet-Z™ CQB and CQBS are available with a variety of internal threads to fit directly onto the rifle barrel.

Standard threads include for example; M14x1, M17x1, M18x1 ½"x20UNF, ½"x28 UNEF to fit most current centrefire rifles.

Other threads are also available.

PERFORMANCE

The jet-Z™CQB and CQBS suppressor reduces sound pressure level by 28-32 dB (A) (depending on calibre and measurement location)

In addition to the reduction in sound signature, the suppressor also reduces recoil and an added benefit is the elimination of visible muzzle flash.

Rifles tested with the jet-Z™ CQB and CQBS suppressor comply with the new personal noise exposure limit set by European Directive 2003/10/EC (140 Pa or137 dB(C)).

sulje
CalibreSuppressor model
jet-Z CQB jet-Z CQBS jet-Z CQB-BL jet-Z CQB-BL 7.62 jet-Z
CQBS-BL
jet-Z
Compact .25
jet-Z Compact .30
204 Ruger       o  
222 Rem   o  
223 Rem   o  
22-250 Rem       o  
243 Win o o       o
260 Rem no no no   no o
7MM-08 Rem no no no   no no
308 Win no no no no no
338 Federal no no no no no no no
25-06 Rem no no no   no o
6.5X55 SE no no no   no o
270 Win no no no   no no
7X64 no no no   no no
30-06 Sprg no no no   no no
9.3X62 no no no no no no no
9.3X66 SAKO no no no no no no no
7 mm Rem Mag no no no   no no no
300 Win Mag no no no   no no no
338 Win Mag no no no no no no no
.338 Lapua Mag no no no no no no no
.375 H&H Mag no no no no no no no
- Recommended
o - Reasonable to use*
no - Do not use
    - Can be used**
* Suppressors can be used on these calibres, however the bullet channel is oversized compared to the calibre, possibly affecting suppressor performance. Also the suppressor may be too short, when compared to the power of the calibre.
** Safe to shoot, however the difference between the suppressor bullet channel and
calibre is quite excessive and clearly affecting the suppressor performance.

» See the compatibility chart of all suppressor models